Quick, Easy to install, and Compact.
Using the fewest number of components, we ensure that the products are installed in an easy way and in the least possible time.
Our Eweichat solutions are re-accessible even after long operating periods.
Availing ourselves of an innovative design, we realize solutions that are considered compact.
Step1:
Unscrew the waterproof connector a cord grip fixing.
Step2:
Thread the compression glands over the flex.
Step3:
Strip the outer sheath of the flexes.
Step4:
Corp the cores down to length.
Step5:
Strip 10-12mm of the insulation of the cores to expose the copper conductor.
Twist the copper strands together. Bend over the copper cores to provide better terminal contact.
Step6:
Thread the cover over the flex.
Step7:
Unscrew the terminal screws.
Step8:
Connect one of the Live cores to the terminal block
Step9:
Connect one of the Neutral cores to the terminal block
Step10:
Connect one of the Earth Cores to the terminal block
Step11:
Connect the remaining cores together in the terminal block in the same fashion as beforehand.
Step12:
Reassemble the connector and make sure everything is tight!
Step13:
Tighten the gland nuts by hand to start off with!
Step14:
If you need to tighten the connector using a pair of water pump pliers and an adjustable spanner to ensure that the connector is watertight!
Step15:
On final check over and you are done!
